Rosewill Atx Mid Tower Gaming Computer Case Review
Our Verdict
If you lot don't mind fighting your instance to install hardware, the Rosewill Cullinan offers great looks, skilful external features and average performance. Cheaper than some of its tempered-drinking glass competitors, information technology'southward however besides expensive to excuse a listing of pocket-size but troublesome design cons.
For
- Great advent with tinted, tempered glass
- Skilful noise deflection
- Supports two large radiators
- Top-console dust filter
- Good USB port selection
- Useful fan controller
- Three 2.5" and two 3.5"/2.5" combo trays
- Tinted panels give lighted fans a soft glow.
Confronting
- Steel structure feels a piddling weak in places
- Riveted ability supply shroud complicates modular cablevision connector access
- Cardholder slot too narrow to easily install cards
- Mediocre cooling performance.
Tom's Hardware Verdict
If yous don't mind fighting your case to install hardware, the Rosewill Cullinan offers great looks, proficient external features and average functioning. Cheaper than some of its tempered-glass competitors, it'southward yet as well expensive to alibi a list of minor but troublesome pattern cons.
Pros
- +
Corking appearance with tinted, tempered glass
- +
Good noise deflection
- +
Supports two large radiators
- +
Elevation-panel grit filter
- +
Good USB port selection
- +
Useful fan controller
- +
Three 2.5" and two three.5"/ii.5" philharmonic trays
- +
Tinted panels give lighted fans a soft glow.
Cons
- -
Steel structure feels a piddling weak in places
- -
Riveted power supply shroud complicates modular cablevision connector admission
- -
Cardholder slot besides narrow to easily install cards
- -
Mediocre cooling operation.
Introducing The Cullinan
Many brands got started as "house brands" for major sellers, and while some have stuck (Craftsman tools anyone?), others have spread out. Beginning life as the better-value make of Newegg, Rosewill rapidly picked up several other sellers every bit information technology added premium parts to its production line.
The Cullinan makes a bold argument about Rosewill's premium production strategy by using tinted glass panels on three sides. Thick 0.20" (five.2mm) tempered side panels add rigidity without the need for frames, while the moderate weight of the front panel indicates a thinner glass insert.
The front end panel ports are more typical of high-terminate cases, with two USB 3.0 and two USB 2.0 ports, headphone and microphone jacks, and a 2-speed fan controller. Both the power and reset buttons have black-anodized aluminum caps, and the rings surrounding these light upward in bluish (power) and red (HDD activeness).
Apart from the position of the removable warning sticker, both side panels are identical and secured identically with slotted thumb screws upon rubberized locator pins.
The rear of the case shows off the 2.ii" of above-motherboard radiator space, forth with a pair of knock-outs for external radiators. The included 120mm rear fan can be upgraded to 140mm, and slotted fan mounts allow vertical adjustment to ease the installation of diverse rear-mounted radiators.
The Cullinan'southward top panel and front panel use magnetic filter sheets with rounded edges to provide an inset appearance. The top panel is shorter and just able to back up two 140m (or 3 120mm) fans, while the forepart supports three fans in either size. Builders who would similar to identify two enormous radiators in both locations should consider possible tank clearance problems at the Cullinan'due south upper-front end corner before selecting radiators.
A power supply intake filter slides out from behind the lesser console.
The Cullinan has only 0.v" of cable space backside the motherboard tray, and a big portion of that space is consumed past iii 2.five" drive trays. A 2.v"-wide support section between the motherboard tray and front console is inset a full i.0" to provide additional clearance for the main power cable, only routing in that way forces it under the two 3.v" hard bulldoze trays. And that'due south where the third iii.5" bulldoze mountain resides, bolted through rubber grommets to the bottom panel via shoulder screws.
Powered by a four-pin ATA-style power lead, the two-speed fan controller is delivered with two empty headers. We used one of those for the rear fan. The L-S-H markings of its top-panel switch correspond to low-stop-high, and both its low-speed and stop settings disable fan LEDs.
More than: All-time Deals
More: Hot Bargains @PurchDeals
Edifice With The Rosewill Cullinan
A power supply shroud covers cables and stops exactly 1.five" short of included fans, so that any one.v"-thick radiator placed there will impact information technology. That shroud is also riveted in place, further restricting access to a modular power supply'southward cablevision connections.
A plastic shroud helps builders muffle even more cable length. Removing it provides space for full-EATX (13" deep) motherboards, and the installation kit fifty-fifty includes the extra standoffs.
Located x" forward of the power supply mounting flange, the lower drive cage does not have any backplane connector, nor rear access to drive cables, then anyone who needs to reach their cables will need to indicate the interface towards the correct-manus panel, where cables are visible through the Cullinan's tinted side panel. These trays besides accept 2.5" mounting holes, although these are inset as well far to piece of work with correct-bending cable connectors.
A cardholder bracket slides open ane/ii" to allow carte du jour installation, which is unfortunately 1/8" less than the infinite required to slide a PCIe graphics carte du jour over its slot. After fluctuant and jamming our test card through that access hole, I was happy to notice regular slot screws in add-on to the clamping mechanism.
Cables include an ATA-style 4-pin power connector for fans, USB 3.0, USB 2.0, Hd Audio, and the switch/indicator cluster. The Power LED connector is split to fit both standard two-pivot and Asus/legacy AT iii-pin spacing. Builders must be advised to attach an ATA power cable to their modular ability supplies before shoving it into the limited-access power supply bay.
Roswill was kind enough to include both thumb screws and standard #6 case screws for mounting a power supply, where the thumb screws lucifer those of the Cullinan's side panel. Shoulders on the iii.v" HDD screws prevent them from being over-tightened confronting vibration-damping grommets.
1 thing Rosewill doesn't mention in the manual is that the upper cable cover also acts as a card caryatid. The circuit board of our test card wasn't long enough to reach it, but it still mated nicely with the carte's cooler support frame.
Other than small cable access difficulties and a carte tab access hole that wasn't large enough to fit a card, component installation went smoothly. I mounted our 2.5" test drive behind the motherboard tray, and removing another 2.5" tray made space for the EPS12V lead.
MORE: Best Cases
MORE: All Example Content
MORE: In Pictures: twoscore Unusual Estimator Instance Mods
floreswhouthearied.blogspot.com
Source: https://www.tomshardware.com/reviews/rosewill-cullinan-eatx-tempered-tinted-glass-gaming-tower-case,4748.html
0 Response to "Rosewill Atx Mid Tower Gaming Computer Case Review"
Post a Comment